Designer Ceramic Wave™
Explore Colours (Textures)
Tech Specs
Tiles Per Sqm | 14.3 |
Weight Per Tile | 3.30kg |
Actual Length | 425mm |
Actual Width | 264mm |
Minimum Roof Pitch | 18° with sarking and 20° without sarking |
Recommended Bond | Cross bond |
Product Overview
Uniquely striking in appearance with long-lasting colour integrity the Wave pattern creates a striking continuous flow with minimalist textures that will add an impressive finish to any modern home.
These state-of-the-art tiles are shaped for design flexibility with long-lasting colour integrity.
Please note: Shade variations can occur from batch to batch. Colours shown are indicative only.
*Please note: Shade variations can occur from batch to batch. Colours shown are indicative only.
Environmental Information
SA = Solar Absorptance | Represents the amount of solar energy absorbed by the roof. A value of 0 indicates that none of the solar radiation is absorbed, whilst a value of 1 indicates that a roof absorbs 100% of solar radiation. |
E = Emittance | Material’s capacity to release absorbed energy, expressed as a ratio between 0 and 1. The higher the emittance, the lower the surface temperature is. Nearly all non-metallic surfaces have high thermal emittance that helps them cool down. |
SRI = Solar Reflectance Index | A measure of the solar absorptance and emittance. The higher the SRI, the cooler the roof will be in the sun. The density of a LUTUM roof causes them to heat up more slowly during the day and return heat stored by them during the night. Roofs with the highest SRI values maintain the coolest roof. |
BCA = Building Code of Australia | BCA employed Solar Absorptance as a primary guide for colour classification, referred to as Light (L < 0.40), Medium (M < 0.60), and Dark (D > 0.60). BCA classification is correct at the time of writing but may be subject to change. Check your local state building regulations at the time of your project. |